X

Lumen help

Adding Internet On‑Demand to a Flexential data center

Using Control Center, you can add a Lumen® Internet On‑Demand connection to your Flexential fabric port. The connection is available within minutes and billed hourly.

 

Once you add the connection, Flexential will set up the virtual cross‑connect (completing your connection). 

Note: You’ll need a data center fabric port attached to your data center equipment before adding a connection.

You can also add Internet On‑Demand to your customer site/building. If you no longer need the connection, you can disconnect it.

To add Internet On‑Demand for Flexential: 

  1. Using the left menu, click Services, then click Add Services.

    Control Center shows services you can add with the Lumen digital experience.
Add Services
  1. Click + Add for Internet On-Demand.  
     

Control Center shows location options. 

Note: If you can’t click on anything, you’ll need to contact your Control Center system administrator to get NaaS permissions.

NaaS Internet On-Demand data center select location
  1. Start typing the location in the search field, select it from the list, then click CONTINUE. 
  1. Select the connection bandwidth, then click CONTINUE.

Note: Bandwidth updates are not available for Flexential connections. 

NaaS Internet On-Demand data center select bandwidth
  1. Select the IP Address Family and Routing Option. 

Note: DDoS Essentials and Lumen Defender are not available for IPv6 and dual stack connections. 

  1. Select IPv4 for the IP Address Family.

  2. Select an IPv4 WAN IP Block. 

  3. Select a routing option.

    Select Static routing if you have a small and simple network that is unlikely to change.

    BGP routing requires more configuration and an extensive understanding of routing protocols and policies.

    Select Directly Connected if your router will access the destination network through one of its interfaces. The next two steps do not display if you select Directly Connected. 

  4. Select an IPv4 LAN IP Block.

  5. Enter the IPv4 WAN Next Hop Sequence.

  6. Click CONTINUE.
NaaS Internet On-Demand IPv4 and static routing

  1. Select IPv6 for the IP Address Family.

  2. Select an IPv6 WAN IP Block. 

  3. Select a routing option.

    Select Static routing if you have a small and simple network that is unlikely to change.

    BGP routing requires more configuration and an extensive understanding of routing protocols and policies.

    Select Directly Connected if your router will access the destination network through one of its interfaces. The next two steps do not appear if you select Directly Connected.

  4. Select an IPv6 LAN IP Block.

  5. Enter the IPv6 WAN Next Hop Sequence.

  6. Click CONTINUE.
NaaS Internet On-Demand IPv6 and static routing

  1. Select Dual Stack IPv4 & IPv6 for the IP Address Family.

  2. Select an IPv4 WAN IP Block. 

  3. Select an IPv6 WAN IP Block. 

  4. Select a routing option.

    Select Static routing if you have a small and simple network that is unlikely to change.

    BGP routing requires more configuration and an extensive understanding of routing protocols and policies.

    Select Directly Connected if your router will access the destination network through one of its interfaces. The next four steps do not display if you select Directly Connected. 

  5. Select an IPv4 LAN IP Block.

  6. Enter the IPv4 WAN Next Hop Sequence.

  7. Select an IPv6 LAN IP Block

  8. Enter the IPv6 WAN Next Hop Sequence.

  9. Click CONTINUE.
NaaS Internet On-Demand dual stack and static routing
  1. Select whether to add DDoS Essentials, then click CONTINUE. 
NaaS Internet On-Demand DDoS Essentials
  1. If Lumen Defender℠ powered by Black Lotus Labs® is available at your location, select whether to add it, then click CONTINUE. 
NaaS Internet On-Demand Lumen Defender
  1. Type a service nickname used as a label on the invoice, then click CONTINUE. 
  1. Select a customer and billing account, then click CONTINUE.

    Not sure which billing account number to select? Consult your accounting department for help selecting a billing account number.
  1. Review the order information, then click SUBMIT ORDER.
  1. Once the order is complete, Flexential will complete the virtual cross connect.